Search



Search for product attributes


  

Search Assistance



Related products


Further information (PDF)


weiter zur Liste zurück pdf print Smart Card Connector C702A


C702A PUSHMATIC 24V with flexprint termination
Part No.C702 10M008 772 2
 
SeriesSmart Card Connectors
SubseriesSmart Card Connector C702A
Common Characteristics
Contact method landing contacts 
Card handling PUSHMATIC 
Version Standard 
Style mounted on a 3.5 inch or 5.25 inch disk drive frame 
Unlocking solenoid Solenoid termination: wire 0,09 mm2 / AWG 286 
Suitable connector Stiftleiste IEC 60603-13, 10 pol bzw. 20 pol Amphenol Serie 816 und 821 
Electrical Characteristics
Contact resistanceIEC 60512-2, Test 2a Data contacts ≤ 100 mΩ
Switch contacts ≤ 200 mΩ 
Insulation resistanceIEC 60512-3, Test 3a ≥ 109  Ω
Voltage proofIEC 60512-2, Test 4a 500 V
Climatical Characteristics
Operating temperature -25 °C ... +85 °C 
Storage temperature -25 °C .. +85 °C 
Climatic categoryDIN EN 60068-1 / IEC 60068-1 25 / 85 / 21 
Mechanical Characteristics
Card extraction forceIEC 60512-7, Test 13b ≤ 5 N
Mechanical lifetimeIEC 60512-5, Test 9a (without corrosion stress) 300.000 mating cycles
VibrationIEC 0512-6-4, Test 6d f = 10 ... 60 Hz; 0,5 mm DA
f = 60 ... 500 Hz; a = 2,5 g
2 h / Axis 
Shock, without disconnectionIEC 60512-4, Test 6c ≤ 10 g; 11 ms; halfsine
2 shocks / direction in 3 axis 
Shock, without destructionIEC 60512-6-3, Test 6c ≤ 200 g; 6 ms; halfsine
2 shocks / direction in 3 axis 
Unlocking solenoid (PUSHMATIC only)
Unlocking solenoid (rated voltage) 5 V ± 10% 
Unlocking solenoid (current consumption) 2,5 A ± 10% 
Current pulse length 10 .. 25 ms 
Pulse break ≥ 0,5 s 
Power failure solenoid (detector)
Power failure solenoid (rated voltage) 5 V ± 10% 
Switch
EMV switch normally open 
Switch sequence The card presence switch is activated after data contacts have mated with the card pads and before the card reaches its final position. This sequence will take place for the minimum sized card pads (and larger) acc. to ISO 7816 
Locking detector is activated when contact system is locked
switch rating 100 mA / 12 V 
Chattering time ≤ 5 ms